|
NSW3000-24T1GT1GC-POE-IN |
| Hardware Specification |
| Ports Type |
24 x 10/100Mbps POE port (RJ45) + 1 x Gigabit port (RJ45) + 1 x Gigabit Combo |
| Standards |
IEEE802.3, IEEE802.3u, IEEE802.3z, IEEE802.3ab, IEEE802.3x, IEEE802.3af, IEEE802.3at, IEEE802.3az |
| Switching capacity |
8.8 Gbps |
| Forwarding performance |
6.55Mpps |
| Packet Buffer |
4 M bit |
| MAC |
16K |
| Weight |
2.9kg |
| Dimensions (W×D×H) |
440mm x 244.8mm x 44mm |
| PoE Standard |
IEEE 802.3af, IEEE 802.3 at |
| Max.PoE Power |
Maximum total power: 370W
Maximum PoE power for single port (port 1-6): 45W
Maximum PoE power for single port (port 7-24): 30W |
| PoE Mode |
ModeA (1236), ModeB (4578) |
| Power Supply |
AC: 100 to 240V, 50/60Hz |
| Max.Power |
385W |
| Prior Ports |
1 to 8 |
| Cooling Fans |
1 |
| Operating Humidity |
5% to 90% RH, noncondensing |
| Operating Temperature |
0°C to 45°C (32°F to 113°F) |
| Indicator |
Power:
Steady on: Normal power input
Off: Abnormal power input
PoE:
Off: The PoE port is not supplying power
Steady on: The PoE port is supplying power normally
Link/Act:
Off: Disconnected to the port
On: Connected to the port
Blinking: Transmitting data
MAX:
Off: The total PoE power is less than 80% of the total power of the device
Steady on: The total PoE power is higher than 85% of the total power of the device |
| Software Specification |
| Ethernet |
Supports full duplex, half duplex, and auto-negotiation working modes.
Supports port auto-negotiation rate.
Supports port priority flow control.
Supports a link aggregation group (consist of two uplink ports)
Supports port flow statistics
Supports enabling/disabling ports |
| VLAN |
Supports both access and trunk modes; allows up to 32 VLANs with IDs from 1 to 4095 |
| MAC |
Support (up to 16K).
Supports clearing the dynamic MAC address |
| POE |
Allows to view PoE status and power.
Allows to enable/disable PoE power supply.
Support HiPoE (Maximum PoE power for single port (port 1-6): 45W).
Supports PoE watchdog.
Supports PoE power supply and allows viewing the power; allows enabling or disabling PoE power supply for the powered device.
Supports up to 250m PoE power supply (Long range performance may vary depending on camera model or cable condition). |
| Extend Mode |
Supports extend mode for up to 250m communication range and 10Mbps auto-negotiation rate. |
| Loop Detection |
Loop Detection |
| QoS |
Supports port rate limitation.
Supports broadcast storm control.
Supports port priority. Packets received by the priority port will be forwarded first when the switch is fully loaded, and the priority port will be powered first when the PoE power supply is full. |
| Security |
Supports port isolation (only for the downlink ports).
Supports locking login IP address, up to 64 addresses can be locked. |
| Alarms |
Allows reporting port abnormal alarms to the software for real-time monitoring. |
| Project Reports |
Supports project reports: collects information of all devices in a project and generates reports, such as device model, IP address, serial number, etc. |
| NAT Traversal |
Supports NAT traversal, enabling access to the Web, SSH, Telnet, and RDP services of devices connected to the switch. |
| AI Assistant |
Supports an AI assistant powered by large language models (LLMs) for querying, configuring, and maintaining switches. |
| Maintenance |
Supports N:1 port mirroring.
Supports unified software configuration, management, and search.
Supports discovering the connected video devices and generating a network topology on the software.
Supports device upgrade, factory settings restoration, configuration import, configuration export, logs export, and device restart on the software. |
| System |
Allows to view the device name, device model, serial number, current version, IP address, MAC address, DNS, operation time, etc.
Allows to edit and manage the IP address and device name.
Supports single-user management, user authentication, and password modification.
Supports manual time configuration and NTP.
Allows to view other switches information on the same network, up to 32 switches.
Allows to view the connected video devices information, up to 64 devices. |
| Basic |
| Installation Type |
Wall, Rack |
| Port Surge Protection |
Common mode ±2KV |
| Port ESD Standard |
Contact ±4KV, Air ±8KV |
| Certification |
CE, FCC, UL |
| Enclosure |
All metal casing, secure and reliable. |
| Compliance |
| NDAA Compliant |
Support |